15 December 2012

Citcop/Panasonic RC-1229PVXU / RA-1229PVXU air conditioner

Exchange of noisy fan motor in the indoor unit.
Remove screws (red circles) and 4 cables which are attached to a small PCB (blue circles). This is a small and straight forward job. Only a PZ1 screwdriver is required.

 Picture of RC-1229PVXU after I've removed the fan motor.



Picture of the fan motor.





After I changed to the new fan motor, I took the old one apart and changed the ball bearings.



Two ball bearings (yellow circles) were bad, which made the motor noisy. The ball bearings are type 608Z (axle 8mm./ diameter 22 mm. / 7 mm. wide)




Ball bearing type 608 Z. 608 ZZ can be used as well.

 

3 comments:

  1. This comment has been removed by a blog administrator.

    ReplyDelete
  2. This comment has been removed by a blog administrator.

    ReplyDelete
  3. Thank You that's a nice information.Pansonic Service Center in Hyderabad also provides useful information. From my personal experience I'm suggesting them. Here are their contact info.

    electronicservicecenter
    Contact Us: 9393538580

    ReplyDelete